Pneumatic cylinders

SMC and Festo pneumatic cylinders – ISO, compact, miniature, round, guided and rodless. Choose by bore, stroke, required force, mounting and position sensing.

Filtros
Encontrado 414 productos
NUESTRO CONSEJO

CD85N25-100-B, SMC, round cylinder ISO6432, double-acting, diameter 25 mm, stroke 100 mm

N.º cat.: CD85N25-100-B

CD85N25-100-B, SMC, round cylinder ISO6432, double-acting, diameter 25 mm, stroke 100 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
60,89 €
sin IVA · 73,68 € con IVA
NUESTRO CONSEJO

CDQ2B50TF-10DZ, SMC, compact cylinder, diameter 50 mm, stroke 10 mm, magnet

N.º cat.: CDQ2B50TF-10DZ

CDQ2B50TF-10DZ, SMC, compact cylinder, diameter 50 mm, stroke 10 mm, magnet. A compact cylinder creates linear pneumatic motion with a short installation length.

Bajo consulta
60,89 €
sin IVA · 73,68 € con IVA

DSNU-10-10-P-A, pneumatic cylinder, 19183, Festo

N.º cat.: DSNU-10-10-P-A

DSNU-10-10-P-A, pneumatic cylinder, 19183, Festo

Bajo consulta
60,89 €
sin IVA · 73,68 € con IVA

CQ2B40TF-20DZ, SMC, compact cylinder, double-acting, single-end rod, diameter 40 mm, stroke 20 mm

N.º cat.: CQ2B40TF-20DZ

CQ2B40TF-20DZ, SMC, compact cylinder, double-acting, single-end rod, diameter 40 mm, stroke 20 mm. A compact cylinder creates linear pneumatic motion with a short installation length.

Bajo consulta
60,89 €
sin IVA · 73,68 € con IVA

CDM2B20-25Z, SMC, round cylinder, double-acting, single-end rod, diameter 20 mm, stroke 25 mm

N.º cat.: CDM2B20-25Z

CDM2B20-25Z, SMC, round cylinder, double-acting, single-end rod, diameter 20 mm, stroke 25 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
60,89 €
sin IVA · 73,68 € con IVA

Pneumatic cylinder TP96SDB32-40C, cylinder diameter 32mm, stroke 40mm, ISO15552

N.º cat.: TP96SDB32-40C

pneumatic cylinder with a diameter of 32mm, piston rod stroke 40mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
61,22 €
sin IVA · 74,07 € con IVA

Pneumatic cylinder TP96SDB32-50C, cylinder diameter 32mm, stroke 50mm, ISO15552

N.º cat.: TP96SDB32-50C

pneumatic cylinder with a diameter of 32mm, piston rod stroke 50mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
61,59 €
sin IVA · 74,52 € con IVA

Pneumatic cylinder TP96SDB32-60C, cylinder diameter 32mm, stroke 60mm, ISO15552

N.º cat.: TP96SDB32-60C

pneumatic cylinder with a cylinder diameter of 32mm, piston rod stroke 60mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
61,95 €
sin IVA · 74,96 € con IVA

Pneumatic cylinder TP96SDB32-70C, cylinder diameter 32mm, stroke 70mm, ISO15552

N.º cat.: TP96SDB32-70C

pneumatic cylinder with a cylinder diameter of 32mm, piston rod stroke 70mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
62,32 €
sin IVA · 75,41 € con IVA

Pneumatic cylinder TP96SDB32-80C, cylinder diameter 32mm, stroke 80mm, ISO15552

N.º cat.: TP96SDB32-80C

pneumatic cylinder with a cylinder diameter of 32mm, piston rod stroke 80mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
62,69 €
sin IVA · 75,85 € con IVA
NUESTRO CONSEJO

Compact cylinder, double-acting, magnet, CDQSB25-100DC, SMC

N.º cat.: CDQSB25-100DC

Compact cylinder, double-acting, magnet, CDQSB25-100DC, SMC

Bajo consulta
63,02 €
sin IVA · 76,25 € con IVA

JCDQ40-5, SMC, miniature compact cylinder, double-acting, single-end rod, diameter 40 mm, stroke 5 mm

N.º cat.: JCDQ40-5

JCDQ40-5, SMC, miniature compact cylinder, double-acting, single-end rod, diameter 40 mm, stroke 5 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
63,34 €
sin IVA · 76,64 € con IVA

Pneumatic cylinder TP96SDB32-100C, cylinder diameter 32mm, stroke 100mm, ISO15552

N.º cat.: TP96SDB32-100C

pneumatic cylinder with a cylinder diameter of 32mm, piston rod stroke 100mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/8", double-acting, CNOMO and C-slot for…

Bajo consulta
63,42 €
sin IVA · 76,74 € con IVA

DPDM-Q-10-25-PA, compact cylinder, 4832294, Festo

N.º cat.: DPDM-Q-10-25-PA

DPDM-Q-10-25-PA, compact cylinder, 4832294, Festo

Bajo consulta
63,75 €
sin IVA · 77,14 € con IVA

CDQSB25-50D, SMC, compact cylinder, double-acting, diameter 25 mm, stroke 50 mm

N.º cat.: CDQSB25-50D

CDQSB25-50D, SMC, compact cylinder, double-acting, diameter 25 mm, stroke 50 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
64,16 €
sin IVA · 77,63 € con IVA

TP96SDB32-125C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 125 mm, ISO15552

N.º cat.: TP96SDB32-125C

TP96SDB32-125C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 125 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
64,53 €
sin IVA · 78,08 € con IVA

CD85N25-50-B, SMC, round pneumatic cylinder, diameter 25 mm, stroke 50 mm

N.º cat.: CD85N25-50-B

CD85N25-50-B, SMC, round pneumatic cylinder, diameter 25 mm, stroke 50 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
64,57 €
sin IVA · 78,13 € con IVA

TP96SDB32-150C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 150 mm, ISO15552

N.º cat.: TP96SDB32-150C

TP96SDB32-150C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 150 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
65,26 €
sin IVA · 78,97 € con IVA

CDQMB20-15, SMC, compact guided cylinder, diameter 20 mm, stroke 15 mm

N.º cat.: CDQMB20-15

CDQMB20-15, SMC, compact guided cylinder, diameter 20 mm, stroke 15 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
65,39 €
sin IVA · 79,12 € con IVA

TP96SDB32-160C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 160 mm, ISO15552

N.º cat.: TP96SDB32-160C

TP96SDB32-160C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 160 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
65,63 €
sin IVA · 79,41 € con IVA

CDJ5B16SR-75-B, SMC, pneumatic cylinder double-acting, stainless, diameter 16 mm, stroke 75 mm, magnet

N.º cat.: CDJ5B16SR-75-B

CDJ5B16SR-75-B, SMC, pneumatic cylinder double-acting, stainless, diameter 16 mm, stroke 75 mm, magnet. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
66,20 €
sin IVA · 80,11 € con IVA
NUESTRO CONSEJO

Compact cylinder, double-acting, magnet, CDU20-50D, SMC

N.º cat.: CDU20-50D

Compact cylinder, double-acting, magnet, CDU20-50D, SMC

Bajo consulta
66,94 €
sin IVA · 81,00 € con IVA

TP96SDB32-200C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 200 mm, ISO15552

N.º cat.: TP96SDB32-200C

TP96SDB32-200C, SMC, pneumatic cylinder, cylinder diameter 32 mm, stroke 200 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
67,10 €
sin IVA · 81,19 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic cylinders

A pneumatic cylinder converts the energy of compressed air into linear motion. It moves a part, presses a tool or operates a mechanism. The range includes, for example, the SMC CJP, CQ2, CQS, CD85, JCQ, MGP and MY1 series as well as Festo cylinders. In addition to actuators, there are GKM clevises and KJ rod ends; when ordering, therefore, distinguish the cylinder itself from its accessories.

Principle: pressure, area and direction of movement

Pressure acts on the effective area of the piston. In a double-acting cylinder, air is supplied alternately to both chambers and the opposite chamber is exhausted. A single-end rod reduces the area for retracting, so at the same overpressure the theoretical force is lower than when extending. This difference is also shown by SMC force table C95.

In the single-acting version with a return spring, air provides the working movement and the spring the return. When extending, its resistance must also be overcome. The design is illustrated by SMC CJP manual. Single-acting and double-acting versions therefore require a different assessment of the working and return movement.

Selection by task and space

First determine the required stroke, the direction of load and the force during the whole cycle. Then compare the diameter, permissible pressure, speed and temperature of the specific version. Check the dimensions in the retracted and extended position, the body mounting, the piston rod end and the space for connection. It is not enough to select only the same diameter and stroke.

A lateral load requires a separate assessment of the guide. For example, SMC MGP connects the cylinder with a guide structure. The force in the axis of movement is not the same as the permissible load on the guide. When replacing, compare the full order code and drawing; a similar series designation does not guarantee an identical version.

For an enquiry, prepare a description of the working cycle: what moves, from where to where, with what load and how often. For a replacement, add a photo of the nameplate and mounting. Write down the required properties and data not yet verified separately; this makes checking the offered version easier.

Our own model calculation: force difference

Let us consider a fictitious double-acting cylinder with a piston diameter D = 30 mm, a piston rod d = 12 mm and an overpressure p = 0.45 MPa. In the model, the opposite chamber has zero overpressure; we neglect friction and dynamics. Since 1 MPa = 1 N/mm², the area for extending A = πD²/4 is 706.9 mm² and the force F = pA approximately 318.1 N. For retracting, A = π(D² − d²)/4 = 593.8 mm² and F approximately 267.2 N.

The difference is 50.9 N. This is our own tutorial model, which does not define product selection or a guaranteed force. An actual design must take into account back pressure, friction, load and an operating reserve.

Mounting and commissioning

Before intervention, secure the load, disconnect the energy supplies and release residual pressure. Align the cylinder axis with the guide of the mechanism and verify free movement over the whole stroke. Protect the piston rod from scratches and the fittings from dirt. Set the speed gradually from a low value; also verify the permissible end-of-stroke energy. The procedure is detailed in SMC manual CQ2.

Diagnostics of irregular movement

In case of jerking or loss of force, check the pressure during operation, the patency of the supply, the speed setting, leaks and alignment. Compare the change in cycle time with the original state. Increasing pressure without finding the cause can mask a mechanical problem. In case of hard end-of-stroke impact, assess speed and load; separate shock absorbers select according to the specific energy requirement.

FAQ

Does the theoretical force value guarantee the actual force on the part?

No. It is the ideal result of pressure and area; the actual movement is also affected by back pressure and mechanical resistance.

Can a position sensor be added to every cylinder?

Verify compatibility for the specific cylinder, its equipment and mounting method. The range can be found among with magnetic sensors; the similarity of the slot alone is not enough.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.