UN 322-1BH01-0AA0, UNIMAT, digital output module SM322, 16DO, 24 V DC, 0, 5 A, UN300

UN 322-1BH01-0AA0 Unimat – digital output module SM322, 16DO, 24 V DC, 0.5 A, UN300

UN 322-1BH01-0AA0 is a digital output module of the UN300 series with 16 outputs 24 V DC / 0.5 A. It is a component of the series UniMAT UN300 designed for industrial control systems, machine modernisation, switchboards and distributed I/O assemblies.

The product is suitable for switching relays, valves, signalling and other 24V DC actuators in automation systems. When choosing, it is important to compare the full order number, number of channels, signal type, supply, connector and the parameters of the specific PLC project.

Typical applications

Switching relays, valves, signalling and other 24v DC actuators in automation systems. The module can be used when building a new control system as well as when servicing and modernising existing automation, provided the electrical and system parameters meet the application requirements.

Technical specifications

Wiring and integration into the PLC assembly

The output module is designed for 24V DC loads. When wiring, verify the current consumption of the connected actuators, the division of outputs into groups and the protection of the supply branches. Signals are connected via a 20-pin front connector.

Compatibility and choosing a replacement

UniMAT lists the variant SM322 16DO, 24 V DC / 0.5 A in the UN300 product series for S7-300. architecture assemblies

When replacing an existing module, a similar name is not enough. Compare the full order number, number and type of I/O, voltage and current levels, resolution, connector, wiring, parameterisation and support in the PLC configuration used.

Official UniMAT documentation

• Official UniMAT product page / source for UN 322-1BH01-0AA0
• Official UniMAT UN Series PLC catalogue and selection guide

Frequently asked questions

Co je UN 322-1BH01-0AA0?

This is a digital output module SM322 of the UniMAT UN300 series in the version 16DO, 24 V DC, 0.5 A.

Where is this module used?

Typically for switching relays, valves, signalling and other 24V DC actuators in automation systems.

What to watch out for when wiring?

Before connecting, verify the voltage, current and type of load. The total group current and the protection method of the output circuit are also important.

How do I verify the correct variant?

Compare the full order number UN 322-1BH01-0AA0, number of channels, signal type, supply, connector and PLC configuration. If any of these data differ, the replacement cannot be confirmed just by the appearance or name of the module.