K508-40AR, control system (24DI, 16DO relay, supply 85~265V AC), KINCO

K508-40AR, control system (24DI, 16DO relay, supply 85~265V AC), KINCO

!!NOTE - FREE SOFTWARE!!

CPU processor: 16-bit industrial
Logic operation execution time: <0.5μS
Word operation time: <48μS
Integer arithmetic operation time: <65μS
Real-number arithmetic operation time: <150μS
Digital inputs: 24 DC24V
Digital outputs: 16 relay (30VDC/250VAC)
Program memory: okolo 4.000 steps
Program backup without the need for a battery
variable memory (V area): 4KB
system variable memory (SM area): 300 bytes
K508-40AR, control system (24DI, 16DO relay, supply 85~265V AC), KINCO 1kB

Supported programming languages: Ladder Drawing (LD), Instruction List (IL)
Password protection: yes

Counters: 256
- counting up, down
- rozsah -32768~32767
- counter retention: yes

Timers: 256
- 1 ms 4x
- 10 ms 16x
- 100 ms 236x

High-speed counters
- single-phase counters: 2, with a maximum frequency of 60 KHz
- dual-phase counters: 2, with a maximum frequency of 20 KHz
 
Analogue potentiometers
- 2x, 10-bit resolution, value stored in internal memory

Interrupts
- timer interrupt: T2/T3, 0.1ms resolution
- edge interrupt: 4, falling or rising edge
- high-speed counter interrupt

Real-time clock: yes, with an error of less than 2 minutes per month at 25°C
RTC backup without supply approx. 180 days
Number of connectable modules: 6
Communication port: 1x RS232 a 2x RS485
Port modes: Programming, Modbus-RTU (master/slave), Free protocol
Connection to COM Port RS232/RS485: PC (for programming), HMI, Modbus devices (readers etc.)
Supply voltage: 85 - 265V AC
Sensor supply: DC24V, max. 500 mA
Dimensions (L*W*H): 125x114x70mm