IC300206, IPF, high-pressure inductive sensor, M30, Sn 20mm, 10V-30V, PNP, NC, cable 2 m, 3 wires

IC300206 – IPF high-pressure inductive sensor

IC300206 IPF is a high-pressure inductive sensor designed for detection in pressure applications up to the values specified by the manufacturer. This variant has: design M30, rated sensing distance 20 mm, supply 10 V-30 V, PNP output with NC contact, connection: cable 2 m, 3 wires.

Key features

• Sensing distance 20 mm – rated value according to the manufacturer's catalogue data.
• Output PNP / NC – electrical design of this variant.
• Supply 10 V-30 V – permissible supply voltage range.
• Connection: Cable 2 m, 3 wires – electrical connection type of this variant.
• Ambient temperature -25 °C–85 °C – permissible temperature range according to the manufacturer.

How a high-pressure inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IC300206

Electrical connection IC300206

IC300206 uses the connection cable 2 m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Typical applications IC300206

• position detection of metal parts in a pressure application
• position checking in hydraulic systems within the manufacturer's pressure limits

How to choose the right variant

• Sensing distance 20 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• PNP output: must match the input type of the control system.
• NC contact: the contact logic is normally closed.
• Connection: Cable 2 m, 3 wires: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IC300206

What is IC300206?

IC300206 is a high-pressure inductive sensor made by IPF.

What is the sensing distance of IC300206?

The rated sensing distance is 20 mm.

What output does IC300206 have?

The electrical design is PNP / NC.

How is IC300206 connected?

The manufacturer specifies the connection as cable 2 m, 3 wires. Check the exact wiring in the datasheet.

What supply does IC300206 require?

The catalogue supply range is 10 V-30 V.