IP180120, IPF, all-metal inductive sensor, M18 × 55.5mm, Sn 1.5mm, 10-30V, PNP, NO, connector M12
- Our price excl. VAT
- 332,06 €
- incl. VAT 21 %
- 401,79 €
Description
IP180120 – IPF all-metal inductive sensor
IP180120 IPF is an all-metal inductive sensor designed for applications requiring a metal active sensor face. This variant has: design M18, overall length 55.5 mm, rated sensing distance 1.5 mm, supply 10–30 V, PNP output with NO contact, connection: connector M12.
Key features
- Sensing distance 1.5 mm – rated value according to the manufacturer's catalogue data.
- PNP / NO output – electrical design of this variant.
- Supply 10–30 V – permissible supply voltage range.
- Connection: Connector M12 – electrical connection type of this variant.
How an all-metal inductive sensor works
The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.
Correction factors for different metals
The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.
| Steel St37 | 1 |
|---|---|
| Brass | 0.1 |
| Stainless steel | 0.95 |
Technical specifications IP180120
| Order code | IP180120 |
|---|---|
| Manufacturer | IPF |
| Version | all-metal inductive sensor |
| Size | M18 |
| Overall length | 55.5 mm |
| Thread | M18 |
| Thread pitch | 1 mm |
| Sensing | 1.5 mm |
| Supply | 10–30 V |
| Output type | PNP |
| Contact | NO |
| Connection | Connector M12 |
| Switching frequency | 800 Hz |
| Rated switching current | 200 mA |
| No-load current | 10 mA |
| Voltage drop | 2 V |
| Hysteresis | 10 % |
| Repeatability | 6.67 % |
| Protective functions | short-circuit protection, reverse polarity protection |
| Maximum operating pressure | 500 bar |
| Maximum peak pressure | 800 bar |
| HS code (TARIC) | 85365019 |
| Country of origin | Germany (DE) |
Electrical connection IP180120
IP180120 uses the connection connector M12. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.
Typical applications IP180120
- detecting metal parts in mechanically demanding environments
- applications requiring a metal active face
How to choose the right variant
- Sensing distance 1.5 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
- PNP output: must match the input type of the control system.
- NO contact: the output changes state when the target is detected.
- Connection: Connector M12: the mating connector or cable must match the data in the datasheet.
Frequently asked questions about IP180120
What is IP180120?
IP180120 is an all-metal inductive sensor made by IPF.
What is the sensing distance of IP180120?
The rated sensing distance is 1.5 mm.
What output does IP180120 have?
The electrical design is PNP / NO.
How is IP180120 connected?
The manufacturer specifies the connection as connector M12. Check the exact wiring in the datasheet.
What supply does IP180120 require?
The catalogue supply range is 10–30 V.
Before ordering, check the order code IP180120 and the decisive parameters against the project or the original sensor.
Always check the dimension drawing, wiring diagram and safety instructions in the manufacturer's datasheet in the tab Downloads.
Technical parameters
| Objednací kód | IP180120 |
|---|---|
| Výrobce | IPF |
| Sensing | 1.5mm |
| Size | M18 |
| Mounting (flush/non-flush) | Yes |
| Connection | Connector M12 |
| Power supply | 10-30VDC |
| Contact | NO |
| Output type | PNP |
| Overall length | 55.5mm |
Ask about this product
Related products
TSSFI0007, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, cable 2 m
TSSFI0007
24,10 €
excl. VAT · 29,17 € incl. VAT
TSSFI0009, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NC, Sn 4 mm, cable 2 m
TSSFI0009
24,55 €
excl. VAT · 29,70 € incl. VAT
TSSFI0008, TECHNOLINE, all-metal inductive sensor, M12, non-flush, 10–30 V DC, PNP, NO, Sn 8 mm, cable 2 m
TSSFI0008
26,76 €
excl. VAT · 32,38 € incl. VAT
TSSFI0206, TECHNOLINE, all-metal inductive sensor, M18, flush, 10–30 V DC, PNP, NO, Sn 12 mm, cable 2 m
TSSFI0206
28,61 €
excl. VAT · 34,62 € incl. VAT
TSSFI0005, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, connector M12/4 pins
TSSFI0005
32,28 €
excl. VAT · 39,05 € incl. VAT