IO300106, IPF, all-metal inductive sensor, M30, Sn 40mm, 10-30V, PNP, NO, cable 2m, 3 wires
- Our price excl. VAT
- 136,69 €
- incl. VAT 21 %
- 165,40 €
Description
IO300106 – IPF all-metal inductive sensor
IO300106 IPF is an all-metal inductive sensor designed for applications requiring a metal active sensor face. This variant has: design M30, rated sensing distance 40 mm, supply 10–30 V, PNP output with NO contact, connection: cable 2m, 3 wires.
Key features
- Sensing distance 40 mm – rated value according to the manufacturer's catalogue data.
- PNP / NO output – electrical design of this variant.
- Supply 10–30 V – permissible supply voltage range.
- Connection: Cable 2m, 3 wires – electrical connection type of this variant.
- IO-Link communication – communication interface specified by the manufacturer.
How an all-metal inductive sensor works
The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.
Correction factors for different metals
The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.
| Steel St37 | 1 |
|---|---|
| Aluminium | 1 |
| Brass | 1.2 |
| Copper | 0.9 |
| Stainless steel V2A, 2 mm | 0.2 |
Technical specifications IO300106
| Order code | IO300106 |
|---|---|
| Manufacturer | IPF |
| Version | all-metal inductive sensor |
| Size | M30 |
| Thread | M30 |
| Thread pitch | 1.5 mm |
| Thread length | 40 mm |
| Sensing | 40 mm |
| Supply | 10–30 V |
| Output type | PNP |
| Contact | NO |
| Connection | Cable 2m, 3 wires |
| Number of wires | 3 |
| Communication | IO-Link |
| Switching frequency | 90 Hz |
| Rated switching current | 200 mA |
| No-load current | 10 mA |
| Voltage drop | 2 V |
| Hysteresis | 15% |
| Repeatability | 5% |
| Indication | LED indicator |
| Protective functions | short-circuit protection, reverse polarity protection |
| Maximum operating pressure | 40bar |
| HS code (TARIC) | 85365019 |
| Country of origin | Germany (DE) |
Electrical connection IO300106
IO300106 uses the connection cable 2m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.
Typical applications IO300106
- detecting metal parts in mechanically demanding environments
- applications requiring a metal active face
How to choose the right variant
- Sensing distance 40 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
- PNP output: must match the input type of the control system.
- NO contact: the output changes state when the target is detected.
- Connection: Cable 2m, 3 wires: the mating connector or cable must match the data in the datasheet.
Frequently asked questions about IO300106
What is IO300106?
IO300106 is an all-metal inductive sensor made by IPF.
What is the sensing distance of IO300106?
The rated sensing distance is 40 mm.
What output does IO300106 have?
The electrical design is PNP / NO.
How is IO300106 connected?
The manufacturer specifies the connection as cable 2m, 3 wires. Check the exact wiring in the datasheet.
What supply does IO300106 require?
The catalogue supply range is 10–30 V.
Before ordering, check the order code IO300106 and the decisive parameters against the project or the original sensor.
Always check the dimension drawing, wiring diagram and safety instructions in the manufacturer's datasheet in the tab Downloads.
Technical parameters
| Objednací kód | IO300106 |
|---|---|
| Výrobce | IPF |
| Sensing | 40mm |
| Size | M30 |
| Mounting (flush/non-flush) | No |
| Connection | Cable 2m PUR |
| Power supply | 10-30VDC |
| Contact | NO |
| Output type | PNP |
| Overall length | 50mm |
| Number of wires | 3 |
Ask about this product
Related products
TSSFI0007, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, cable 2 m
TSSFI0007
24,10 €
excl. VAT · 29,17 € incl. VAT
TSSFI0009, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NC, Sn 4 mm, cable 2 m
TSSFI0009
24,55 €
excl. VAT · 29,70 € incl. VAT
TSSFI0008, TECHNOLINE, all-metal inductive sensor, M12, non-flush, 10–30 V DC, PNP, NO, Sn 8 mm, cable 2 m
TSSFI0008
26,76 €
excl. VAT · 32,38 € incl. VAT
TSSFI0206, TECHNOLINE, all-metal inductive sensor, M18, flush, 10–30 V DC, PNP, NO, Sn 12 mm, cable 2 m
TSSFI0206
28,61 €
excl. VAT · 34,62 € incl. VAT
TSSFI0005, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, connector M12/4 pins
TSSFI0005
32,28 €
excl. VAT · 39,05 € incl. VAT