IC080106, IPF, all-metal inductive sensor, M8 × 45mm, Sn 3mm, 10-30VDC, PNP, NO, PUR cable 2 m, 3 wires

IC080106 – IPF all-metal inductive sensor

IC080106 IPF is an all-metal inductive sensor designed for applications requiring a metal active sensor face. This variant has: design M8, overall length 45 mm, rated sensing distance 3 mm, supply 10–30 V DC, PNP output with NO contact, connection: PUR cable 2 m, 3 wires.

Key features

• Sensing distance 3 mm – rated value according to the manufacturer's catalogue data.
• PNP / NO output – electrical design of this variant.
• Supply 10–30 V DC – permissible supply voltage range.
• Flush mounting – design of the active face according to the manufacturer.
• Connection: PUR cable 2 m, 3 wires – electrical connection type of this variant.
• Degree of protection IP68 – degree of protection stated in the catalogue data.
• IO-Link communication – communication interface specified by the manufacturer.
• Ambient temperature -25–85 °C – permissible temperature range according to the manufacturer.

How an all-metal inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IC080106

Electrical connection IC080106

IC080106 uses the connection PUR cable 2 m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IC080106

The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing. The maximum tightening torque specified by the manufacturer is 6 Nm.

Typical applications IC080106

• detecting metal parts in mechanically demanding environments
• applications requiring a metal active face

How to choose the right variant

• Sensing distance 3 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Flush version: check that the installation method matches the manufacturer's installation drawing.
• PNP output: must match the input type of the control system.
• NO contact: the output changes state when the target is detected.
• Connection: PUR cable 2 m, 3 wires: the mating connector or cable must match the data in the datasheet.
• Degree of protection IP68: assess together with the specific environmental conditions and the connection method.

Frequently asked questions about IC080106

What is IC080106?

IC080106 is an all-metal inductive sensor made by IPF.

What is the sensing distance of IC080106?

The rated sensing distance is 3 mm.

What output does IC080106 have?

The electrical design is PNP / NO.

How is IC080106 connected?

The manufacturer specifies the connection as PUR cable 2 m, 3 wires. Check the exact wiring in the datasheet.

What supply does IC080106 require?

The catalogue supply range is 10–30 V DC.