IN200107, IPF, inductive sensor, Ø20mm, Sn 10mm, PNP, PVC cable 2 m, 3 wires

IN200107 – IPF inductive sensor

IN200107 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design Ø20 mm, rated sensing distance 10 mm, PNP output, connection: PVC cable 2 m, 3 wires.

Key features

• Sensing distance 10 mm – rated value according to the manufacturer's catalogue data.
• PNP output – electrical design of this variant.
• Connection: PVC cable 2 m, 3 wires – electrical connection type of this variant.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IN200107

Electrical connection IN200107

IN200107 uses the connection PVC cable 2 m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Typical applications IN200107

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 10 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• PNP output: must match the input type of the control system.
• Connection: PVC cable 2 m, 3 wires: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IN200107

What is IN200107?

IN200107 is an inductive sensor made by IPF.

What is the sensing distance of IN200107?

The rated sensing distance is 10 mm.

What output does IN200107 have?

The electrical design is PNP.

How is IN200107 connected?

The manufacturer specifies the connection as PVC cable 2 m, 3 wires. Check the exact wiring in the datasheet.