IC180206, IPF, all-metal inductive sensor, M18 × 50mm, Sn 10mm, 10-30VDC, PNP, NC, PUR cable 2 m, 3 wires
- Our price excl. VAT
- 120,67 €
- incl. VAT 21 %
- 146,02 €
Description
IC180206 – IPF all-metal inductive sensor
IC180206 IPF is an all-metal inductive sensor designed for applications requiring a metal active sensor face. This variant has: design M18, overall length 50 mm, rated sensing distance 10 mm, supply 10–30 V DC, PNP output with NC contact, connection: PUR cable 2 m, 3 wires.
Key features
- Sensing distance 10 mm – rated value according to the manufacturer's catalogue data.
- Output PNP / NC – electrical design of this variant.
- Supply 10–30 V DC – permissible supply voltage range.
- Flush mounting – design of the active face according to the manufacturer.
- Connection: PUR cable 2 m, 3 wires – electrical connection type of this variant.
- Degree of protection IP68 – degree of protection stated in the catalogue data.
- Ambient temperature -25–85 °C – permissible temperature range according to the manufacturer.
How an all-metal inductive sensor works
The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.
Correction factors for different metals
The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.
| Steel St37 | 1 |
|---|---|
| Aluminium | 1 |
| Brass | 1.2 |
| Copper | 0.8 |
| Stainless steel V2A, 1 mm | 0.5 |
| Stainless steel V2A, 2 mm | 0.9 |
Technical specifications IC180206
| Order code | IC180206 |
|---|---|
| Manufacturer | IPF |
| Version | all-metal inductive sensor |
| Size | M18 |
| Overall length | 50 mm |
| Thread | M18 |
| Thread pitch | 1 mm |
| Thread length | 50 mm |
| Sensing | 10 mm |
| Mounting | Flush |
| Supply | 10–30 V DC |
| Output type | PNP |
| Contact | NC |
| Connection | PUR cable 2 m, 3 wires |
| Number of wires | 3 |
| Degree of protection | IP68 |
| Ambient temperature | -25–85 °C |
| Housing material | stainless steel 1.4305 |
| Active face material | stainless steel 1.4305 |
| Switching frequency | 200 Hz |
| Rated switching current | 200 mA |
| No-load current | 10 mA |
| Voltage drop | 2 V |
| Hysteresis | 15–15 % |
| Repeatability | 5 % |
| Indication | LED indication |
| Protective functions | short-circuit protection, reverse polarity protection |
| Maximum operating pressure | 60 bar |
| HS code (TARIC) | 85365019 |
| Country of origin | Germany (DE) |
Electrical connection IC180206
IC180206 uses the connection PUR cable 2 m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.
Mounting IC180206
The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing.
Typical applications IC180206
- detecting metal parts in mechanically demanding environments
- applications requiring a metal active face
How to choose the right variant
- Sensing distance 10 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
- Flush version: check that the installation method matches the manufacturer's installation drawing.
- PNP output: must match the input type of the control system.
- NC contact: the contact logic is normally closed.
- Connection: PUR cable 2 m, 3 wires: the mating connector or cable must match the data in the datasheet.
- Degree of protection IP68: assess together with the specific environmental conditions and the connection method.
Frequently asked questions about IC180206
What is IC180206?
IC180206 is an all-metal inductive sensor made by IPF.
What is the sensing distance of IC180206?
The rated sensing distance is 10 mm.
What output does IC180206 have?
The electrical design is PNP / NC.
How is IC180206 connected?
The manufacturer specifies the connection as PUR cable 2 m, 3 wires. Check the exact wiring in the datasheet.
What supply does IC180206 require?
The catalogue supply range is 10–30 V DC.
Before ordering, check the order code IC180206 and the decisive parameters against the project or the original sensor.
Always check the dimension drawing, wiring diagram and safety instructions in the manufacturer's datasheet in the tab Downloads.
Technical parameters
| Objednací kód | IC180206 |
|---|---|
| Výrobce | IPF |
| Sensing | 10mm |
| Size | M18 |
| Mounting (flush/non-flush) | Yes |
| Connection | Cable 2m PUR |
| Power supply | 10-30VDC |
| Contact | NC |
| Output type | PNP |
| Overall length | 50mm |
| Number of wires | 3 |
Ask about this product
Related products
TSSFI0007, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, cable 2 m
TSSFI0007
24,10 €
excl. VAT · 29,17 € incl. VAT
TSSFI0009, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NC, Sn 4 mm, cable 2 m
TSSFI0009
24,55 €
excl. VAT · 29,70 € incl. VAT
TSSFI0008, TECHNOLINE, all-metal inductive sensor, M12, non-flush, 10–30 V DC, PNP, NO, Sn 8 mm, cable 2 m
TSSFI0008
26,76 €
excl. VAT · 32,38 € incl. VAT
TSSFI0206, TECHNOLINE, all-metal inductive sensor, M18, flush, 10–30 V DC, PNP, NO, Sn 12 mm, cable 2 m
TSSFI0206
28,61 €
excl. VAT · 34,62 € incl. VAT
TSSFI0005, TECHNOLINE, all-metal inductive sensor, M12, flush, 10–30 V DC, PNP, NO, Sn 4 mm, connector M12/4 pins
TSSFI0005
32,28 €
excl. VAT · 39,05 € incl. VAT