Telefon +420 774 723 123 Kosár · 0 · üres

Push-in fittings

Push-in fittings for quick, tight connection of pneumatic tubes without tools – straight, elbow, branch and barb. Choose by tube outside diameter and shape.

Alkategóriák

Szűrők
Találatok 196 termék
TIPPÜNK RAKTÁRON

TPU04, TECHNOLINE, straight fitting for Ø4mm tube

Kat. szám: TPU04

TPU04, TECHNOLINE, straight fitting for Ø4mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Raktáron 5 db vagy több · egységenként: 10 db
0,54 €
ÁFA nélkül · 0,65 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPU06, TECHNOLINE, straight fitting for Ø6mm tube

Kat. szám: TPU06

TPU06, TECHNOLINE, straight fitting for Ø6mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Raktáron 5 db vagy több · egységenként: 10 db
0,59 €
ÁFA nélkül · 0,71 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube

Kat. szám: TPV04

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

Raktáron 5 db vagy több · egységenként: 10 db
0,59 €
ÁFA nélkül · 0,71 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPU08, TECHNOLINE, straight fitting for Ø8mm tube

Kat. szám: TPU08

TPU08, TECHNOLINE, straight fitting for Ø8mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Raktáron 5 db vagy több · egységenként: 10 db
0,63 €
ÁFA nélkül · 0,76 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube

Kat. szám: TPV06

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

Raktáron 5 db vagy több · egységenként: 10 db
0,63 €
ÁFA nélkül · 0,76 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPY04, TECHNOLINE, Y-connector for Ø4mm tube

Kat. szám: TPY04

TPY04, TECHNOLINE, Y-connector for Ø4mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

Raktáron 5 db vagy több · egységenként: 10 db
0,63 €
ÁFA nélkül · 0,76 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPE04, TECHNOLINE, T-connector for Ø4mm tube

Kat. szám: TPE04

TPE04, TECHNOLINE, T-connector for Ø4mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Raktáron 5 db vagy több · egységenként: 10 db
0,68 €
ÁFA nélkül · 0,82 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPY06, TECHNOLINE, Y-connector for Ø6mm tube

Kat. szám: TPY06

TPY06, TECHNOLINE, Y-connector for Ø6mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

Raktáron 5 db vagy több · egységenként: 10 db
0,68 €
ÁFA nélkül · 0,82 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPE06, TECHNOLINE, T-connector for Ø6mm tube

Kat. szám: TPE06

TPE06, TECHNOLINE, T-connector for Ø6mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Raktáron 5 db vagy több · egységenként: 10 db
0,72 €
ÁFA nélkül · 0,87 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPV10, TECHNOLINE, elbow fitting 90° for Ø10mm tube

Kat. szám: TPV10

TPV10, TECHNOLINE, elbow fitting 90° for Ø10mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

Raktáron 5 db vagy több · egységenként: 10 db
0,72 €
ÁFA nélkül · 0,87 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPY08, TECHNOLINE, Y-connector for Ø8mm tube

Kat. szám: TPY08

TPY08, TECHNOLINE, Y-connector for Ø8mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

Raktáron 5 db vagy több · egységenként: 10 db
0,72 €
ÁFA nélkül · 0,87 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPU10, TECHNOLINE, straight fitting for Ø10mm tube

Kat. szám: TPU10

TPU10, TECHNOLINE, straight fitting for Ø10mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Raktáron 5 db vagy több · egységenként: 10 db
0,81 €
ÁFA nélkül · 0,98 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPE08, TECHNOLINE, T-connector for Ø8mm tube

Kat. szám: TPE08

TPE08, TECHNOLINE, T-connector for Ø8mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Raktáron 5 db vagy több · egységenként: 10 db
0,81 €
ÁFA nélkül · 0,98 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPU12, TECHNOLINE, straight fitting for Ø12mm tube

Kat. szám: TPU12

TPU12, TECHNOLINE, straight fitting for Ø12mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Raktáron 5 db vagy több · egységenként: 5 db
0,90 €
ÁFA nélkül · 1,09 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPV12, TECHNOLINE, elbow fitting 90° for Ø12mm tube

Kat. szám: TPV12

TPV12, TECHNOLINE, elbow fitting 90° for Ø12mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

Raktáron 5 db vagy több · egységenként: 5 db
0,90 €
ÁFA nélkül · 1,09 € ÁFÁ-val
RAKTÁRON

TPZA04, TECHNOLINE, cross fitting for Ø4mm tube

Kat. szám: TPZA04

TPZA04, TECHNOLINE, cross fitting for Ø4mm tube. Cross connection of four pneumatic branches at a single point.

Raktáron 5 db vagy több · egységenként: 5 db
0,99 €
ÁFA nélkül · 1,20 € ÁFÁ-val
RAKTÁRON

TPGJ08-04, TECHNOLINE, plug-in reducer Ø8mm→Ø4mm

Kat. szám: TPGJ08-04

TPGJ08-04, TECHNOLINE, plug-in reducer Ø8mm→Ø4mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Raktáron 5 db vagy több · egységenként: 5 db
1,04 €
ÁFA nélkül · 1,25 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPE10, TECHNOLINE, T-connector for Ø10mm tube

Kat. szám: TPE10

TPE10, TECHNOLINE, T-connector for Ø10mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Raktáron 5 db vagy több · egységenként: 10 db
1,04 €
ÁFA nélkül · 1,25 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPY10, TECHNOLINE, Y-connector for Ø10mm tube

Kat. szám: TPY10

TPY10, TECHNOLINE, Y-connector for Ø10mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

Raktáron 5 db vagy több · egységenként: 5 db
1,08 €
ÁFA nélkül · 1,31 € ÁFÁ-val
RAKTÁRON

TPZA06, TECHNOLINE, cross fitting for Ø6mm tube

Kat. szám: TPZA06

TPZA06, TECHNOLINE, cross fitting for Ø6mm tube. Cross connection of four pneumatic branches at a single point.

Raktáron 5 db vagy több · egységenként: 5 db
1,13 €
ÁFA nélkül · 1,36 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPE12, TECHNOLINE, T-connector for Ø12mm tube

Kat. szám: TPE12

TPE12, TECHNOLINE, T-connector for Ø12mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Raktáron 5 db vagy több · egységenként: 5 db
1,17 €
ÁFA nélkül · 1,42 € ÁFÁ-val
RAKTÁRON

TPZA08, TECHNOLINE, cross fitting for Ø8mm tube

Kat. szám: TPZA08

TPZA08, TECHNOLINE, cross fitting for Ø8mm tube. Cross connection of four pneumatic branches at a single point.

Raktáron 5 db vagy több · egységenként: 5 db
1,17 €
ÁFA nélkül · 1,42 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TBPU04, TECHNOLINE, straight all-metal fitting for Ø4mm tube

Kat. szám: TBPU04

TBPU04, TECHNOLINE, straight all-metal fitting for Ø4mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Metal body.

Raktáron 5 db vagy több
1,17 €
ÁFA nélkül · 1,42 € ÁFÁ-val
RAKTÁRON

TPGJ10-06, TECHNOLINE, plug-in reducer Ø10mm→Ø6mm

Kat. szám: TPGJ10-06

TPGJ10-06, TECHNOLINE, plug-in reducer Ø10mm→Ø6mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Raktáron 5 db vagy több · egységenként: 5 db
1,26 €
ÁFA nélkül · 1,53 € ÁFÁ-val
RAKTÁRON

TPK04, TECHNOLINE, multi-way manifold for Ø4mm tube

Kat. szám: TPK04

TPK04, TECHNOLINE, multi-way manifold for Ø4mm tube. A multi-way compressed air distributor for clear connection of consumer branches.

Raktáron 5 db vagy több · egységenként: 5 db
1,26 €
ÁFA nélkül · 1,53 € ÁFÁ-val

Az árak tartalmazzák az újrahasznosítási díjat.

Push-in fittings

Select push-in fittings according to what they actually connect: two tubes, a tube with a threaded port, or a tube with the plug-in stem of another part. The range includes Pneuflex and SMC versions in various shapes and sizes. For ordering, therefore, first draw both opposite interfaces. The category name alone does not determine the design of each item.

Section of fitting KQ2 from SMC separates the gripping of the tube by a toothed element from its sealing. The release button engages the gripping. The sealing function and mechanical securing therefore have their own design elements.

Interface first, then shape

The selection record should include the tube outer diameter, the full designation of the counterpart and the required line direction. Record the inner diameter separately for assessing the passage. For the thread, require its system and size; a value in inches without the system is not enough to decide on a replacement. Record separately whether you are selecting a thread for connecting the medium or a thread for fixing into the panel. The similar appearance of these points can hide a different purpose when ordering.

To continue in one axis, open Straight fittings, for changing direction Elbow fittings and for splitting the line Branch fittings. Our own practical rule is to select the functional diagram first and only then the smallest body. For a confined assembly, you also need to draw the access of fingers, tools and the path for pulling out the tube during replacement.

For a replacement part, prepare a simple diagram of the original and intended assembly. Both must show all ends that change during the intervention. If the replacement adds an adapter, also add the new detachable point and its accessibility. This gives you a basis for choosing between a direct replacement and a route change, without deciding solely by the size of the available component.

Mounting as a check of the whole assembly

Before intervention, ensure the safe state of the equipment and verify that no pressure remains in the section being changed. For your own mounting check, compare the actual parts with the drawing, mark the individual branches and check access to all detachable points. Also record the fixing of the line around the fitting. The purpose of the check is to reveal whether future replacement of one tube will require dismantling other components.

Pneuflex for the straight PU family describes inserting the tube and releasing it by pressing the collet. Always relate the exact mounting procedure to the selected version.

Our own model: why pressure changes the conditions of intervention

Let us consider an explicitly model closed passage with a diameter of 5 mm and an overpressure of 0.7 MPa. A force F = p × A acts on the flat closure. The area A = π × 5² / 4 is approximately 19.6 mm²; since 0.7 MPa corresponds to 0.7 N/mm², the force is about 13.7 N. This is our own illustration of the effect of pressure, not the load capacity of the fitting, the tube pull-out force or the recommended working pressure of the product. The model explains why the state of a connection cannot be assessed by hand alone.

Diagnostics by location of the symptom

In the service record, separate a problem at the tube inlet, at the threaded counterpart and in the body of the assembly. Record whether the symptom appeared after replacement, during line movement or only during simultaneous consumption. Your own comparison procedure always changes a single circumstance: line layout, verified counterpart or specific connecting part. This way, a selection error can be distinguished from a mounting problem without randomly changing the whole branch.

FAQ

Is the same diameter on the package enough?

Check which interface the value belongs to. Record the tube diameter, the plug-in stem diameter and the mounting hole size as different quantities.

Should the fitting remain accessible after the machine is completed?

Yes, take the specific service operation into account in the design. Assess the free space for inserting, releasing and pulling out the line, not just for the body dimension.

Sütik ezen a weboldalon

A technikai sütikre a kosár és a rendelés működéséhez van szükség — ezeket mindig használjuk. Az analitikai sütik megmutatják, mely oldalakat keresik az emberek és hol akadnak el, és segítenek javítani a webáruházat. Ezeket csak akkor használjuk, ha engedélyezi. Bővebben: adatkezelési tájékoztatóban.