Telefon +420 774 723 123 Kosár · 0 · üres

Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Alkategóriák

Szűrők
Találatok 696 termék
TIPPÜNK

TPLJ04, TECHNOLINE, elbow plug-in adapter, tube Ø4mm

Kat. szám: TPLJ04

TPLJ04, TECHNOLINE, elbow plug-in adapter, tube Ø4mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Érdeklődjön
1,26 €
ÁFA nélkül · 1,52 € ÁFÁ-val
TIPPÜNK

TPB06-M6, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø6mm, male thread M6

Kat. szám: TPB06-M6

TPB06-M6, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread M6. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Érdeklődjön · egységenként: 10 db
1,32 €
ÁFA nélkül · 1,59 € ÁFÁ-val

KQ2P-12, SMC, push-in port plug, Ø12mm

Kat. szám: KQ2P-12

KQ2P-12, SMC: push-in port plug. Ø12mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,35 €
ÁFA nélkül · 1,63 € ÁFÁ-val

KQ2N04-99, SMC, plug-in connecting stem, 2× stem Ø4mm

Kat. szám: KQ2N04-99

KQ2N04-99, SMC, plug-in connecting stem, 2× stem Ø4mm. A plug-in connecting stem connecting existing push-in fittings, not loose tubes.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val

KQ2P-10, SMC, push-in port plug, Ø10mm

Kat. szám: KQ2P-10

KQ2P-10, SMC: push-in port plug. Ø10mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val

KQ2C06-00A, SMC, plug for open tube end, Ø6mm

Kat. szám: KQ2C06-00A

KQ2C06-00A, SMC: plug for open tube end. Ø6mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val

KQ2P-16, SMC, push-in port plug, Ø16mm

Kat. szám: KQ2P-16

KQ2P-16, SMC: push-in port plug. Ø16mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val

M-3AU-4, SMC, straight fitting with hose barb, thread M3, tube Ø4mm

Kat. szám: M-3AU-4

M-3AU-4, SMC, straight fitting with hose barb, thread M3, tube Ø4mm. A hose barb fitting for a soft tube; it is not a standard push-in collet.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val
TIPPÜNK

TPC10-G03, TECHNOLINE, straight push-in fitting, tube Ø10mm, male thread G3/8

Kat. szám: TPC10-G03

TPC10-G03, TECHNOLINE: straight push-in fitting; tube Ø10mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Érdeklődjön · egységenként: 5 db
1,50 €
ÁFA nélkül · 1,82 € ÁFÁ-val

M-5AU-4, SMC, straight fitting with hose barb, thread M5, tube Ø4mm

Kat. szám: M-5AU-4

M-5AU-4, SMC, straight fitting with hose barb, thread M5, tube Ø4mm. A hose barb fitting for a soft tube; it is not a standard push-in collet.

Érdeklődjön
1,55 €
ÁFA nélkül · 1,88 € ÁFÁ-val

KQ2H02-04A, SMC, straight fitting, tube Ø2mm, male R1/2

Kat. szám: KQ2H02-04A

KQ2H02-04A, SMC, straight fitting, tube Ø2mm, male R1/2. Straight connection of the tube to threaded port R1/2; the thread seal must be verified.

Érdeklődjön
1,59 €
ÁFA nélkül · 1,93 € ÁFÁ-val
TIPPÜNK

TPC04-M6C, TECHNOLINE, miniature straight push-in fitting, tube Ø4mm, male thread M6

Kat. szám: TPC04-M6C

TPC04-M6C, TECHNOLINE: straight push-in fitting; tube Ø4mm, male thread M6. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Érdeklődjön · egységenként: 5 db
1,64 €
ÁFA nélkül · 1,99 € ÁFÁ-val
TIPPÜNK

TPC08-G03, TECHNOLINE, straight push-in fitting, tube Ø8mm, male thread G3/8

Kat. szám: TPC08-G03

TPC08-G03, TECHNOLINE: straight push-in fitting; tube Ø8mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Érdeklődjön · egységenként: 10 db
1,64 €
ÁFA nélkül · 1,99 € ÁFÁ-val
TIPPÜNK

TPLJ08, TECHNOLINE, elbow plug-in adapter, tube Ø8mm

Kat. szám: TPLJ08

TPLJ08, TECHNOLINE, elbow plug-in adapter, tube Ø8mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Érdeklődjön
1,71 €
ÁFA nélkül · 2,07 € ÁFÁ-val

KQ2N06-99, SMC, plug-in connecting stem, 2× stem Ø6mm

Kat. szám: KQ2N06-99

KQ2N06-99, SMC, plug-in connecting stem, 2× stem Ø6mm. A plug-in connecting stem connecting existing push-in fittings, not loose tubes.

Érdeklődjön
1,72 €
ÁFA nélkül · 2,08 € ÁFÁ-val

Az árak tartalmazzák az újrahasznosítási díjat.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Sütik ezen a weboldalon

A technikai sütikre a kosár és a rendelés működéséhez van szükség — ezeket mindig használjuk. Az analitikai sütik megmutatják, mely oldalakat keresik az emberek és hol akadnak el, és segítenek javítani a webáruházat. Ezeket csak akkor használjuk, ha engedélyezi. Bővebben: adatkezelési tájékoztatóban.