TECHNOLINE magnetic sensors

TECHNOLINE TMS magnetic sensors for C-slot and adapter mounting on various cylinder types. Choose by contact, lead and mounting kit.

Filtros
Encontrado 5 productos
−3 % NUESTRO CONSEJO EN STOCK

BMG2-012, TECHNOLINE, T-slot adapter, SMC

N.º cat.: BMG2-012

BMG2-012 TECHNOLINE – magnetic sensor, C. Industrial product for automation, detection or measurement.

En stock 5 uds. o más
0,71 € 0,74 €
sin IVA · 0,86 € con IVA
−3 % NUESTRO CONSEJO EN STOCK

TMS0002, TECHNOLINE, magnetic sensor, 10-30VDC, Reed contact, cable 2m

N.º cat.: TMS0002

TMS0002 TECHNOLINE – magnetic sensor, Reed contact, NO (normally open), C-slot, 3m PVC cable. Industrial product for automation, detection or measurement.

En stock 5 uds. o más
13,74 € 14,17 €
sin IVA · 16,63 € con IVA
−3 % NUESTRO CONSEJO EN STOCK

TMS0005, TECHNOLINE, magnetic sensor, 10-30VDC, Reed contact, cable 2m

N.º cat.: TMS0005

TMS0005 TECHNOLINE – magnetic sensor, contact, NO (normally open), C-slot, 2 m PVC cable. Industrial product for automation, detection or measurement.

En stock 5 uds. o más
13,74 € 14,17 €
sin IVA · 16,63 € con IVA
−3 % NUESTRO CONSEJO EN STOCK

TMS0003, TECHNOLINE, magnetic sensor, 10-30VDC, PNP, cable 0, 3m + connector M8/3

N.º cat.: TMS0003

TMS0003 TECHNOLINE – magnetic sensor, M8, PNP, NO (normally open), C-slot. Industrial product for automation.

En stock 5 uds. o más
15,41 € 15,89 €
sin IVA · 18,65 € con IVA
−3 % NUESTRO CONSEJO EN STOCK

TMS0001, TECHNOLINE, magnetic sensor, 10-30VDC, PNP, cable 0, 3m + connector M8/3

N.º cat.: TMS0001

TMS0001 TECHNOLINE – magnetic sensor, M8, PNP, NO (normally open), C-slot. Industrial product for automation.

En stock 1 ks
16,28 € 16,79 €
sin IVA · 19,70 € con IVA

Los precios incluyen la tasa de reciclaje.

TECHNOLINE magnetic sensors

This category combines TMS series sensors and mounting accessories. When choosing, therefore, first determine whether you need a complete sensor, just a mounting part or an assembly for a different cylinder profile. Divide the order list according to these tasks and keep the exact designation for each item.

Documented TMS versions

The range includes TMS0001, TMS0002, TMS0003 and TMS0005. For TMS0002 and TMS0005 a reed contact is stated; TMS0001 is described as a three-wire PNP/NO version. TMS0005 is an example of a C-slot sensor supplied with an adapter for the T-slot. These data come from the TECHNOLINE brand description and do not automatically apply to all TMS models.

Procedure for selecting a sensor and adapter

  1. Copy the designation of the original sensor and cylinder. Attach a photo of the profile at the mounting location, ideally with the old fixing still in place.
  2. Decide whether you are looking for an electrical replacement or a change of mechanical fixing. If both change at the same time, compare the sensor and the mounting assembly separately.
  3. For each candidate, write down the number of wires, output function and connection method. Have missing data documented by the diagram of the specific code.
  4. Check the package contents. Do not consider an adapter listed for one variant to be part of all sensors of the same series without confirmation.
  5. Before repeat purchases, test the first assembly on the given cylinder. Record the fixing, cable route and behaviour of the control input.

Example found: TMS0005 in a service assembly

If you are considering the TMS0005, mentioned above, also prepare the slot dimensions and the space for the cable outlet for assessment. A practical list should contain the sensor, confirmed accessories, connection point and required cable length. This procedure makes it possible to check the whole installation before ordering. The mere presence of an adapter in the description does not prove suitability for every profile designated as a T-slot.

Assess a separate mounting part according to its own purpose. For example, SMC lists BMG2-012 as an accessory for mounting sensors; specific assemblies may also require another insert. Verification documentation is provided by the SMC mounting documentation. Interchangeability with the adapter supplied with TMS cannot be derived from this example.

Common mistakes and FAQ

Does a mounting adapter replace the sensor?

No. Write mechanical accessories separately in the order list. The requirement for a functional assembly must also specify the sensor and its electrical connection.

Can a variant be chosen from a photo only?

A photo is useful for comparing space and fixing. For an electrical replacement, attach the diagram, input designation and data of the original part; appearance alone is not enough for the decision.

What to do if the cable data are not clear?

Before ordering, have the actual length, termination and contact assignment of the supplied unit confirmed. Document the original connection and state the required version directly in the enquiry.

Help with selection is available from technical support. Other brands are in the category Magnetic Sensors; connection is handled by Sensor Cables and Connectors.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.