Push-in fittings

Push-in fittings for quick, tight connection of pneumatic tubes without tools – straight, elbow, branch and barb. Choose by tube outside diameter and shape.

Subcategorías

Filtros
Encontrado 196 productos
NUESTRO CONSEJO EN STOCK

TPY12, TECHNOLINE, Y-connector for Ø12mm tube

N.º cat.: TPY12

TPY12, TECHNOLINE, Y-connector for Ø12mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,26 €
sin IVA · 1,52 € con IVA
EN STOCK

TPZA10, TECHNOLINE, cross fitting for Ø10mm tube

N.º cat.: TPZA10

TPZA10, TECHNOLINE, cross fitting for Ø10mm tube. Cross connection of four pneumatic branches at a single point.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,39 €
sin IVA · 1,69 € con IVA
EN STOCK

TPK06, TECHNOLINE, multi-way manifold for Ø6mm tube

N.º cat.: TPK06

TPK06, TECHNOLINE, multi-way manifold for Ø6mm tube. A multi-way compressed air distributor for clear connection of consumer branches.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,48 €
sin IVA · 1,79 € con IVA
NUESTRO CONSEJO EN STOCK

TPU03C, TECHNOLINE, miniature straight fitting for Ø3mm tube

N.º cat.: TPU03C

TPU03C, TECHNOLINE, miniature straight fitting for Ø3mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,48 €
sin IVA · 1,79 € con IVA
NUESTRO CONSEJO EN STOCK

TBPU06, TECHNOLINE, straight all-metal fitting for Ø6mm tube

N.º cat.: TBPU06

TBPU06, TECHNOLINE, straight all-metal fitting for Ø6mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Metal body.

En stock 5 uds. o más
1,48 €
sin IVA · 1,79 € con IVA
EN STOCK

TPGJ12-08, TECHNOLINE, plug-in reducer Ø12mm→Ø8mm

N.º cat.: TPGJ12-08

TPGJ12-08, TECHNOLINE, plug-in reducer Ø12mm→Ø8mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,53 €
sin IVA · 1,85 € con IVA
NUESTRO CONSEJO EN STOCK

TPU04C, TECHNOLINE, miniature straight fitting for Ø4mm tube

N.º cat.: TPU04C

TPU04C, TECHNOLINE, miniature straight fitting for Ø4mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,53 €
sin IVA · 1,85 € con IVA
NUESTRO CONSEJO EN STOCK

TPV03C, TECHNOLINE, miniature elbow fitting 90° for Ø3mm tube

N.º cat.: TPV03C

TPV03C, TECHNOLINE, miniature elbow fitting 90° for Ø3mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,57 €
sin IVA · 1,90 € con IVA
NUESTRO CONSEJO EN STOCK

TPU06C, TECHNOLINE, miniature straight fitting for Ø6mm tube

N.º cat.: TPU06C

TPU06C, TECHNOLINE, miniature straight fitting for Ø6mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,57 €
sin IVA · 1,90 € con IVA
EN STOCK

TPK08, TECHNOLINE, multi-way manifold for Ø8mm tube

N.º cat.: TPK08

TPK08, TECHNOLINE, multi-way manifold for Ø8mm tube. A multi-way compressed air distributor for clear connection of consumer branches.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,62 €
sin IVA · 1,96 € con IVA
NUESTRO CONSEJO EN STOCK

TPV04C, TECHNOLINE, miniature elbow fitting 90° for Ø4mm tube

N.º cat.: TPV04C

TPV04C, TECHNOLINE, miniature elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,62 €
sin IVA · 1,96 € con IVA
NUESTRO CONSEJO EN STOCK

TPV06C, TECHNOLINE, miniature elbow fitting 90° for Ø6mm tube

N.º cat.: TPV06C

TPV06C, TECHNOLINE, miniature elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
1,66 €
sin IVA · 2,01 € con IVA
EN STOCK

TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm

N.º cat.: TPGJ06-04

TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,71 €
sin IVA · 2,07 € con IVA
NUESTRO CONSEJO EN STOCK

TBPU08, TECHNOLINE, straight all-metal fitting for Ø8mm tube

N.º cat.: TBPU08

TBPU08, TECHNOLINE, straight all-metal fitting for Ø8mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Metal body.

En stock 5 uds. o más
1,89 €
sin IVA · 2,28 € con IVA
EN STOCK

TPGJ08-06, TECHNOLINE, plug-in reducer Ø8mm→Ø6mm

N.º cat.: TPGJ08-06

TPGJ08-06, TECHNOLINE, plug-in reducer Ø8mm→Ø6mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

En stock 5 uds. o más
1,98 €
sin IVA · 2,39 € con IVA
EN STOCK

TPZA12, TECHNOLINE, cross fitting for Ø12mm tube

N.º cat.: TPZA12

TPZA12, TECHNOLINE, cross fitting for Ø12mm tube. Cross connection of four pneumatic branches at a single point.

En stock 5 uds. o más · en múltiplos de 5 uds.
1,98 €
sin IVA · 2,39 € con IVA
NUESTRO CONSEJO EN STOCK

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube

N.º cat.: TBPV04

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

En stock 5 uds. o más
1,98 €
sin IVA · 2,39 € con IVA
EN STOCK

TPK10, TECHNOLINE, multi-way manifold for Ø10mm tube

N.º cat.: TPK10

TPK10, TECHNOLINE, multi-way manifold for Ø10mm tube. A multi-way compressed air distributor for clear connection of consumer branches.

En stock 5 uds. o más · en múltiplos de 5 uds.
2,02 €
sin IVA · 2,45 € con IVA
NUESTRO CONSEJO EN STOCK

TPU16, TECHNOLINE, straight fitting for Ø16mm tube

N.º cat.: TPU16

TPU16, TECHNOLINE, straight fitting for Ø16mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

En stock 5 uds. o más · en múltiplos de 5 uds.
2,07 €
sin IVA · 2,50 € con IVA
NUESTRO CONSEJO EN STOCK

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube

N.º cat.: TPV16

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

En stock 5 uds. o más · en múltiplos de 5 uds.
2,07 €
sin IVA · 2,50 € con IVA
NUESTRO CONSEJO EN STOCK

TPE03C, TECHNOLINE, miniature T-connector for Ø3mm tube

N.º cat.: TPE03C

TPE03C, TECHNOLINE, miniature T-connector for Ø3mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Miniature version.

En stock 5 uds. o más
2,11 €
sin IVA · 2,56 € con IVA
NUESTRO CONSEJO EN STOCK

TPE04C, TECHNOLINE, miniature T-connector for Ø4mm tube

N.º cat.: TPE04C

TPE04C, TECHNOLINE, miniature T-connector for Ø4mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
2,16 €
sin IVA · 2,61 € con IVA
NUESTRO CONSEJO EN STOCK

TPE06C, TECHNOLINE, miniature T-connector for Ø6mm tube

N.º cat.: TPE06C

TPE06C, TECHNOLINE, miniature T-connector for Ø6mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Miniature version.

En stock 5 uds. o más · en múltiplos de 10 uds.
2,25 €
sin IVA · 2,72 € con IVA
NUESTRO CONSEJO EN STOCK

TBPV06, TECHNOLINE, all-metal elbow fitting 90° for Ø6mm tube

N.º cat.: TBPV06

TBPV06, TECHNOLINE, all-metal elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

En stock 5 uds. o más
2,29 €
sin IVA · 2,77 € con IVA
EN STOCK

TPGJ10-08, TECHNOLINE, plug-in reducer Ø10mm→Ø8mm

N.º cat.: TPGJ10-08

TPGJ10-08, TECHNOLINE, plug-in reducer Ø10mm→Ø8mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

En stock 5 uds. o más · en múltiplos de 5 uds.
2,47 €
sin IVA · 2,99 € con IVA

Los precios incluyen la tasa de reciclaje.

Push-in fittings

Select push-in fittings according to what they actually connect: two tubes, a tube with a threaded port, or a tube with the plug-in stem of another part. The range includes Pneuflex and SMC versions in various shapes and sizes. For ordering, therefore, first draw both opposite interfaces. The category name alone does not determine the design of each item.

Section of fitting KQ2 from SMC separates the gripping of the tube by a toothed element from its sealing. The release button engages the gripping. The sealing function and mechanical securing therefore have their own design elements.

Interface first, then shape

The selection record should include the tube outer diameter, the full designation of the counterpart and the required line direction. Record the inner diameter separately for assessing the passage. For the thread, require its system and size; a value in inches without the system is not enough to decide on a replacement. Record separately whether you are selecting a thread for connecting the medium or a thread for fixing into the panel. The similar appearance of these points can hide a different purpose when ordering.

To continue in one axis, open Straight fittings, for changing direction Elbow fittings and for splitting the line Branch fittings. Our own practical rule is to select the functional diagram first and only then the smallest body. For a confined assembly, you also need to draw the access of fingers, tools and the path for pulling out the tube during replacement.

For a replacement part, prepare a simple diagram of the original and intended assembly. Both must show all ends that change during the intervention. If the replacement adds an adapter, also add the new detachable point and its accessibility. This gives you a basis for choosing between a direct replacement and a route change, without deciding solely by the size of the available component.

Mounting as a check of the whole assembly

Before intervention, ensure the safe state of the equipment and verify that no pressure remains in the section being changed. For your own mounting check, compare the actual parts with the drawing, mark the individual branches and check access to all detachable points. Also record the fixing of the line around the fitting. The purpose of the check is to reveal whether future replacement of one tube will require dismantling other components.

Pneuflex for the straight PU family describes inserting the tube and releasing it by pressing the collet. Always relate the exact mounting procedure to the selected version.

Our own model: why pressure changes the conditions of intervention

Let us consider an explicitly model closed passage with a diameter of 5 mm and an overpressure of 0.7 MPa. A force F = p × A acts on the flat closure. The area A = π × 5² / 4 is approximately 19.6 mm²; since 0.7 MPa corresponds to 0.7 N/mm², the force is about 13.7 N. This is our own illustration of the effect of pressure, not the load capacity of the fitting, the tube pull-out force or the recommended working pressure of the product. The model explains why the state of a connection cannot be assessed by hand alone.

Diagnostics by location of the symptom

In the service record, separate a problem at the tube inlet, at the threaded counterpart and in the body of the assembly. Record whether the symptom appeared after replacement, during line movement or only during simultaneous consumption. Your own comparison procedure always changes a single circumstance: line layout, verified counterpart or specific connecting part. This way, a selection error can be distinguished from a mounting problem without randomly changing the whole branch.

FAQ

Is the same diameter on the package enough?

Check which interface the value belongs to. Record the tube diameter, the plug-in stem diameter and the mounting hole size as different quantities.

Should the fitting remain accessible after the machine is completed?

Yes, take the specific service operation into account in the design. Assess the free space for inserting, releasing and pulling out the line, not just for the body dimension.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.