Analogue Sensors

Analogue inductive sensors measure the distance of a metal object and convert it into a 0–10 V or 4–20 mA output. They are suitable for measuring position, deflection, eccentricity or thickness. Choose by measuring range, output type and housing size.

Filtros
Encontrado 45 productos

IB080076, IPF, analogue inductive distance-measuring sensor, M8 × 60mm, Sn 0-4mm, 15-30VDC, Analogue, connector M8, 3 pins

N.º cat.: IB080076

IB080076 from IPF is an analogue inductive distance-measuring sensor. M8, Sn 0–4 mm, 15–30 V DC, Analogue, connector M8, 3 pins, IP67.

Bajo consulta
203,91 €
sin IVA · 246,73 € con IVA

IB090076, IPF, analogue inductive distance-measuring sensor, 8x8x59mm, Sn 0-4mm, 15-30VDC, Analogue, connector M8, 3 pins

N.º cat.: IB090076

IB090076 from IPF is an analogue inductive distance-measuring sensor. 8x8x59 mm, Sn 0–4 mm, 15–30 V DC, Analogue, connector M8, 3 pins, IP67.

Bajo consulta
208,45 €
sin IVA · 252,22 € con IVA

Inductive analog sensor, IA8-30GM-I3, 015598, PEPPERL+FUCHS

N.º cat.: IA8-30GM-I3

Inductive analog sensor, IA8-30GM-I3, 015598, PEPPERL+FUCHS

Bajo consulta
237,35 €
sin IVA · 287,20 € con IVA

Inductive analog sensor, IA15-30GM-I3, 022878, PEPPERL+FUCHS

N.º cat.: IA15-30GM-I3

Inductive analog sensor, IA15-30GM-I3, 022878, PEPPERL+FUCHS

Bajo consulta
237,35 €
sin IVA · 287,20 € con IVA

Inductive analog sensor, IA40-FP-I3-P1, 019768, PEPPERL+FUCHS

N.º cat.: IA40-FP-I3-P1

Inductive analog sensor, IA40-FP-I3-P1, 019768, PEPPERL+FUCHS

Bajo consulta
262,73 €
sin IVA · 317,90 € con IVA

Los precios incluyen la tasa de reciclaje.

Analogue inductive sensors in special applications

An analogue inductive sensor converts a change in the distance of a metal target into a continuous electrical signal. It is suitable where you need to monitor position or the course of a movement rather than just information that a single limit position has been reached.

Browse sensors with analogue output · Detailed guide to analogue sensors and PLC connection

LANBAO LR12X-M-E2 analogue inductive sensor with connector
LANBAO LR12X-M-E2. Original product image. Source: manufacturer LANBAO. Check the output and measuring range according to the order code.

0–10 V or 4–20 mA output

The output type must match the analogue input of the control system. Check the supply, wiring, common reference and permissible load. Also set the signal range in the input card and the PLC program; an identical connector alone does not guarantee a correct connection.

Measuring range and accuracy

Determine the working area according to the measuring range of the specific model. The switching distance of a standard inductive sensor does not replace it. Take into account the material, size and orientation of the target, linearity, repeatability and temperature drift. Verify the conversion of the signal to millimetres on the actual part at several known positions.

Analogue output and environmental resistance

An analogue output says nothing about resistance to high pressure, chemicals or welding fields. If the application requires these properties, they must be confirmed for the selected model as well. Also assess the cable and connector and leave a margin against mechanical contact with the target.

What to prepare for selection

Specify the material and dimensions of the target, the minimum and maximum distance, the required accuracy, the rate of change, the PLC input type and the environmental conditions. A more detailed procedure can be found in the guide to analogue sensors. Other designs can be compared in the category Special sensors.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.