Telefon +420 774 723 123 Kosár · 0 · üres

Blanking plugs

Blanking plugs for closing unused threaded ports and push-in connections. Choose by thread or tube diameter.

Szűrők
Találatok 29 termék
TIPPÜNK RAKTÁRON

TPP04, TECHNOLINE, plug-in plug for push-in port, Ø4mm stem for push-in port

Kat. szám: TPP04

TPP04, TECHNOLINE: plug-in plug for push-in port. Ø4mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több · egységenként: 10 db
0,25 €
ÁFA nélkül · 0,30 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPP06, TECHNOLINE, plug-in plug for push-in port, Ø6mm stem for push-in port

Kat. szám: TPP06

TPP06, TECHNOLINE: plug-in plug for push-in port. Ø6mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több · egységenként: 10 db
0,25 €
ÁFA nélkül · 0,30 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPP08, TECHNOLINE, plug-in plug for push-in port, Ø8mm stem for push-in port

Kat. szám: TPP08

TPP08, TECHNOLINE: plug-in plug for push-in port. Ø8mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több · egységenként: 10 db
0,25 €
ÁFA nélkül · 0,30 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPP10, TECHNOLINE, plug-in plug for push-in port, Ø10mm stem for push-in port

Kat. szám: TPP10

TPP10, TECHNOLINE: plug-in plug for push-in port. Ø10mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több · egységenként: 5 db
0,25 €
ÁFA nélkül · 0,30 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPIM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, TSPIM version

Kat. szám: TSPIM-G01

TSPIM-G01, TECHNOLINE: threaded plug with internal hexagon. male thread G1/8, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,28 €
ÁFA nélkül · 0,33 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TPP12, TECHNOLINE, plug-in plug for push-in port, Ø12mm stem for push-in port

Kat. szám: TPP12

TPP12, TECHNOLINE: plug-in plug for push-in port. Ø12mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több · egységenként: 5 db
0,29 €
ÁFA nélkül · 0,36 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPIM-G02, TECHNOLINE, threaded plug with internal hexagon, male thread G1/4, closing a hole, TSPIM version

Kat. szám: TSPIM-G02

TSPIM-G02, TECHNOLINE: threaded plug with internal hexagon. male thread G1/4, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,35 €
ÁFA nélkül · 0,43 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPHM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, nickel-plated brass, NBR O-ring

Kat. szám: TSPHM-G01

TSPHM-G01, TECHNOLINE: threaded plug with internal hexagon. male thread G1/8, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,39 €
ÁFA nélkül · 0,48 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPIM-G03, TECHNOLINE, threaded plug with internal hexagon, male thread G3/8, closing a hole, TSPIM version

Kat. szám: TSPIM-G03

TSPIM-G03, TECHNOLINE: threaded plug with internal hexagon. male thread G3/8, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,43 €
ÁFA nélkül · 0,52 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G01, TECHNOLINE, threaded plug with external hexagon, male thread G1/8, closing a hole, TSPPM version

Kat. szám: TSPPM-G01

TSPPM-G01, TECHNOLINE: threaded plug with external hexagon. male thread G1/8, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,44 €
ÁFA nélkül · 0,54 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPHM-G02, TECHNOLINE, threaded plug with internal hexagon, male thread G1/4, closing a hole, nickel-plated brass, NBR O-ring

Kat. szám: TSPHM-G02

TSPHM-G02, TECHNOLINE: threaded plug with internal hexagon. male thread G1/4, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,49 €
ÁFA nélkül · 0,59 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPIM-G04, TECHNOLINE, threaded plug with internal hexagon, male thread G1/2, closing a hole, TSPIM version

Kat. szám: TSPIM-G04

TSPIM-G04, TECHNOLINE: threaded plug with internal hexagon. male thread G1/2, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,51 €
ÁFA nélkül · 0,62 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G02, TECHNOLINE, threaded plug with external hexagon, male thread G1/4, closing a hole, TSPPM version

Kat. szám: TSPPM-G02

TSPPM-G02, TECHNOLINE: threaded plug with external hexagon. male thread G1/4, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,54 €
ÁFA nélkül · 0,65 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPHM-G03, TECHNOLINE, threaded plug with internal hexagon, male thread G3/8, closing a hole, nickel-plated brass, NBR O-ring

Kat. szám: TSPHM-G03

TSPHM-G03, TECHNOLINE: threaded plug with internal hexagon. male thread G3/8, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,59 €
ÁFA nélkül · 0,71 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPHM-G04, TECHNOLINE, threaded plug with internal hexagon, male thread G1/2, closing a hole, nickel-plated brass, NBR O-ring

Kat. szám: TSPHM-G04

TSPHM-G04, TECHNOLINE: threaded plug with internal hexagon. male thread G1/2, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,63 €
ÁFA nélkül · 0,76 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G03, TECHNOLINE, threaded plug with external hexagon, male thread G3/8, closing a hole, TSPPM version

Kat. szám: TSPPM-G03

TSPPM-G03, TECHNOLINE: threaded plug with external hexagon. male thread G3/8, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,64 €
ÁFA nélkül · 0,77 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G04, TECHNOLINE, threaded plug with external hexagon, male thread G1/2, closing a hole, TSPPM version

Kat. szám: TSPPM-G04

TSPPM-G04, TECHNOLINE: threaded plug with external hexagon. male thread G1/2, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
0,98 €
ÁFA nélkül · 1,19 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G06, TECHNOLINE, threaded plug with external hexagon, male thread G3/4, closing a hole, TSPPM version

Kat. szám: TSPPM-G06

TSPPM-G06, TECHNOLINE: threaded plug with external hexagon. male thread G3/4, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
1,57 €
ÁFA nélkül · 1,90 € ÁFÁ-val
TIPPÜNK RAKTÁRON

TSPPM-G08, TECHNOLINE, threaded plug with external hexagon, male thread G1, closing a hole, TSPPM version

Kat. szám: TSPPM-G08

TSPPM-G08, TECHNOLINE: threaded plug with external hexagon. male thread G1, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

Raktáron 5 db vagy több
2,41 €
ÁFA nélkül · 2,91 € ÁFÁ-val

KQ2P-04, SMC, push-in port plug, Ø4mm

Kat. szám: KQ2P-04

KQ2P-04, SMC: push-in port plug. Ø4mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
0,86 €
ÁFA nélkül · 1,04 € ÁFÁ-val

KQ2P-08, SMC, push-in port plug, Ø8mm

Kat. szám: KQ2P-08

KQ2P-08, SMC: push-in port plug. Ø8mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
0,90 €
ÁFA nélkül · 1,09 € ÁFÁ-val

KQ2P-06, SMC, push-in port plug, Ø6mm

Kat. szám: KQ2P-06

KQ2P-06, SMC: push-in port plug. Ø6mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
0,94 €
ÁFA nélkül · 1,14 € ÁFÁ-val

KQ2C04-00A, SMC, plug for open tube end, Ø4mm

Kat. szám: KQ2C04-00A

KQ2C04-00A, SMC: plug for open tube end. Ø4mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,15 €
ÁFA nélkül · 1,39 € ÁFÁ-val

KQ2P-12, SMC, push-in port plug, Ø12mm

Kat. szám: KQ2P-12

KQ2P-12, SMC: push-in port plug. Ø12mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,35 €
ÁFA nélkül · 1,63 € ÁFÁ-val

KQ2P-10, SMC, push-in port plug, Ø10mm

Kat. szám: KQ2P-10

KQ2P-10, SMC: push-in port plug. Ø10mm. Use in pneumatic distribution and verified mounting criteria.

Érdeklődjön
1,43 €
ÁFA nélkül · 1,73 € ÁFÁ-val

Az árak tartalmazzák az újrahasznosítási díjat.

Blanking plugs

The listing includes the designations TPP, TSPIM, TSPHM, TSPPM and SMC KQ2P or KQ2C. For correct selection, first determine what is to be closed: a threaded hole, the push-in socket of a fitting, or the end of a tube. Compare the description of the ordered part with the drawing of the actual counterpart.

The interface determines the connection principle

Manufacturing example Pneuflex PP shows a solid push-in shank inserted into another push-in fitting. It is not inserting a plug into the inner bore of a tube. In this design, release is done by pressing the release ring of the fitting. Therefore assess the outer dimension of the inserted part and the method of its retention together.

A different example is Pneuflex SPIM, which closes a counterpart with a female thread and uses an internal hexagon for the tool. Pneuflex SPPM has a hexagonal head for a spanner. The manufacturing sheets list several thread systems; the same verbal size designation is therefore not yet a complete specification of the connection.

Our own selection procedure and mounting approach

We recommend compiling an order record with three separate items: full designation of the counterpart, interface according to its drawing and available space for the tool. For a push-in point, draw the position of the release ring. For a threaded point, mark access to the plug head. This way, a part that would not be accessible for dismantling after surrounding components are assembled can be detected before ordering.

The SPIM and SPPM examples show that mounting access must be planned according to the position of the working hexagon. Inside the hole you need space to insert the tool, around the external head space for a spanner. The different head is not just a visual detail. The chosen tool must correspond to the place through which the manufacturer assumes the mounting torque is transmitted.

Our own model: force on a closed opening

Let us consider only a model closure, not a specific plug sold. Let us assume a uniform overpressure of 6 bar and a circular effective area with a diameter of 8 mm. The area is π × 8² / 4 ≈ 50.3 mm². Since six bar corresponds to 0.6 N/mm², the resulting pressure force is F = p × A ≈ 30.2 N.

With a model increase of the effective diameter to 12 mm, we get an area of 113.1 mm² and a force of 67.9 N. The diameter increased by half, but the force to 2.25 times. The calculation uses the pressure difference on both sides of the closure. Neither the thread diameter nor the number on the bag can automatically be used as the effective diameter. The model does not determine the permissible load, tightening torque or safety reserve of the product.

Diagnostics by location of the leak

For your own service record, we recommend drawing the location of the detected leak and attaching a photo of the interface after safe shutdown and depressurisation. Separate observations at the circumference of the push-in socket, at the threaded joint and at another point of the assembly. For each step, record the part used and the changed condition. Before reordering, add the full code of the part used and the designation of the counterpart to the record. A photo without dimensions can capture the appearance, but does not replace identification of the interface. For a recurring fault, compare the same points in the assembly so that changing the plug does not hide a cause not yet determined. Do not consider a mere match of the trade name as proof of a correct connection.

FAQ

Is it enough to state the tube diameter when ordering?

For the described PP, the push-in interface of the fitting is decisive. Therefore include the counterpart in the selection, not just the size of the tube brought into the surrounding distribution.

How to prepare a list of plugs for a machine modification?

Mark each closed point in the diagram, assign it the counterpart drawing and the required access. After changing the branching, also check the continuity with Flow control valves a Silencers.

Sütik ezen a weboldalon

A technikai sütikre a kosár és a rendelés működéséhez van szükség — ezeket mindig használjuk. Az analitikai sütik megmutatják, mely oldalakat keresik az emberek és hol akadnak el, és segítenek javítani a webáruházat. Ezeket csak akkor használjuk, ha engedélyezi. Bővebben: adatkezelési tájékoztatóban.