Telefon +420 774 723 123 Kosár · 0 · üres

FESTO magnetic sensors

Festo SME-8M (reed) and SMT-10M (magnetoresistive) magnetic sensors for sensing piston position in Festo cylinders with T- and C-slots. Choose by slot, contact and connection.

Szűrők
Találatok 16 termék
TIPPÜNK

SME-8M-DS-24V-K-0.3-M8D, FESTO, magnetic sensor 543861

Kat. szám: SME-8M-DS-24V-K-0,3-M8D

SME-8M-DS-24V-K-0.3-M8D from FESTO: magnetic sensor 543861. Parameters and availability at Technoline.cz.

Érdeklődjön
17,57 €
ÁFA nélkül · 21,26 € ÁFÁ-val
TIPPÜNK

SME-8M-DS-24V-K-2.5-OE, FESTO, magnetic sensor, 543862

Kat. szám: SME-8M-DS-24V-K-2,5-OE

SME-8M-DS-24V-K-2.5-OE from FESTO: magnetic sensor, 543862. Parameters and availability at Technoline.cz.

Érdeklődjön
25,71 €
ÁFA nélkül · 31,10 € ÁFÁ-val
TIPPÜNK

SME-8M-ZS-24V-K-2.5-OE, Festo, magnetic reed sensor for T-slot, NO, 2-wire, 5–30 V AC/DC, cable 2.5 m, 543872

Kat. szám: SME-8M-ZS-24V-K-2,5-OE

SME-8M-ZS-24V-K-2.5-OE, Festo – magnetic proximity sensor for T-slot. Festo part number: 543872; Principle: magnetic reed; Contact function: NO (normally open); Output: contacting, bipolar, 2-wire…

Érdeklődjön
26,69 €
ÁFA nélkül · 32,29 € ÁFÁ-val
TIPPÜNK

SME-8M-DS-24V-K-5.0-OE, FESTO, magnetic sensor, 543863

Kat. szám: SME-8M-DS-24V-K-5,0-OE

SME-8M-DS-24V-K-5.0-OE from FESTO: magnetic sensor, 543863. Parameters and availability at Technoline.cz.

Érdeklődjön
30,20 €
ÁFA nélkül · 36,55 € ÁFÁ-val
TIPPÜNK

543876, FESTO, Magnetic sensor SME-8M-DS-24V-K-7, 5-OE

Kat. szám: 543876

543876 FESTO – magnetic sensor, NO. Industrial product for automation, detection or measurement.

Érdeklődjön
34,00 €
ÁFA nélkül · 41,15 € ÁFÁ-val
TIPPÜNK

546799, FESTO, Magnetic sensor SME-8M-DO-24V-K-7, 5-OE

Kat. szám: 546799

546799 FESTO – magnetic sensor, NO. Industrial product for automation, detection or measurement.

Érdeklődjön
37,03 €
ÁFA nélkül · 44,80 € ÁFÁ-val
TIPPÜNK

171169, FESTO, Magnetic sensor SME-8-ZS-KL-LED-24

Kat. szám: 171169

171169 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
37,76 €
ÁFA nélkül · 45,69 € ÁFÁ-val
TIPPÜNK

SME-8-K-LED-24, FESTO, magnetic sensor, 150855

Kat. szám: SME-8-K-LED-24

SME-8-K-LED-24 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
38,01 €
ÁFA nélkül · 45,99 € ÁFÁ-val
TIPPÜNK

526622, FESTO, Magnetic sensor SME-8-SL-LED-24

Kat. szám: 526622

526622 FESTO – magnetic sensor, M8, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
40,58 €
ÁFA nélkül · 49,10 € ÁFÁ-val
TIPPÜNK

152820, FESTO, Magnetic sensor SME-8-K-LED-230

Kat. szám: 152820

152820 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
41,69 €
ÁFA nélkül · 50,44 € ÁFÁ-val
TIPPÜNK

161756, FESTO, Magnetic sensor SME-8-K-24-S6

Kat. szám: 161756

161756 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
41,77 €
ÁFA nélkül · 50,54 € ÁFÁ-val
TIPPÜNK

175404, FESTO, Magnetic sensor SME-8-K5-LED-24

Kat. szám: 175404

175404 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
42,50 €
ÁFA nélkül · 51,43 € ÁFÁ-val
TIPPÜNK

530491, FESTO, Magnetic sensor SME-8M-DS-24V-K-7, 5-OE

Kat. szám: 530491

530491 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

Érdeklődjön
47,16 €
ÁFA nélkül · 57,07 € ÁFÁ-val
TIPPÜNK

160251, FESTO, SME-8-O-K-LED-24, magnetic sensor

Kat. szám: 160251

160251 FESTO – magnetic sensor, NC, T. Industrial product for automation, detection or measurement.

Érdeklődjön
50,96 €
ÁFA nélkül · 61,66 € ÁFÁ-val

SMT-10M-PS-24V-E-0.3-L-M8D, Festo, magnetoresistive piston position sensor, PNP, 5–30 V DC, M8, cable 0.3 m, 551375

Kat. szám: SMT-10M-PS-24V-E-0,3-L-M8D

SMT-10M-PS-24V-E-0.3-L-M8D, Festo – magnetoresistive proximity sensor. Festo part number: 551375; Principle: magnetoresistive; Output: PNP; Function: normally open; Supply: 5–30 V DC.

Érdeklődjön
51,90 €
ÁFA nélkül · 62,80 € ÁFÁ-val

SME-8-S-LED-24, FESTO, magnetic sensor, 150857

Kat. szám: SME-8-S-LED-24

SME-8-S-LED-24 FESTO – magnetic sensor. Industrial product for automation, detection or measurement.

Érdeklődjön
59,26 €
ÁFA nélkül · 71,70 € ÁFÁ-val

Az árak tartalmazzák az újrahasznosítási díjat.

FESTO magnetic sensors

In this category you will find sensors SME-8 and SME-8M as well as model SMT-10M-PS-24V-E-0.3-L-M8D, part number 551375. The selection includes different principles and slot designs. When maintaining a machine, therefore, compare the full code including the contact designation, cable length and its termination. Also keep the FESTO numerical order designation.

What distinguishes the listed variants

SME-8M uses the reed principle and is designed for the T-slot. SMT-10M is a semiconductor magnetoresistive sensor for the C-slot. The difference therefore includes the electrical principle and the mechanical mounting. For SME-8M DS also denotes a three-wire normally open contact, ZS a two-wire normally open version and DO a three-wire normally closed contact. See FESTO overview and type key SME-8M.

There is also a difference in access during mounting. SME-8M can be inserted into the T-slot from above, while the older versions SME-8 mentioned are slid in lengthwise. When replacing on an installed cylinder, therefore, first check whether the end of the slot remains accessible. A comparison of mounting is contained in the FESTO documentation for STAF accessories.

The specific SMT-10M-PS-24V-E-0.3-L-M8D has a PNP/NO output, a 0.3 m cable with a three-pole M8x1 connector and a longitudinal outlet. It is inserted into the C-slot from above. These data for part number 551375 are confirmed by the FESTO ordering table, DHPC accessories. An identical connector with another sensor does not mean the same slot or principle.

Selection for a specific service intervention

  1. Write down the part number, the full sensor type and the actuator designation. First distinguish between T- and C-slots; then compare the electrical design.
  2. Determine the required rest state of the contact. When replacing DS with DO, the signal evaluation would have to be reassessed; do not consider them identical variants.
  3. Measure the cable route to the actual connection point. Decide whether you need a connector at the cylinder or a continuous cable to the terminal block.
  4. Compare the electrical limits of the specific part with the connected load. Do not derive the permissible current only from the number of wires.
  5. After replacement, check the function in a manual cycle and record the setting for future service.

Example found: order number 543861

SME-8M-DS-24V-K-0.3-M8D, part number 543861, is a normally open reed version with a 0.3 m cable and a three-pole threaded M8 connector. The variant 543862 has a free cable end 2.5 m long instead. This is a specific pair for comparing the connection method according to the FESTO ordering table, not common parameters of all SME sensors.

If a plant has several generations of cylinders, record them separately even if they use similar SME sensors. Add a photo of the slot access to the service record. It will help determine when planning the replacement whether the end of the profile will need to be made accessible or an adjacent part removed.

Common mistakes and FAQ

Do three wires automatically mean a semiconductor sensor?

No. For the SME-8M-DS mentioned, the documentation combines a three-wire connection with the reed principle. Check the number of wires, the principle and the contact function separately.

Is it enough to keep the designation 24V when replacing SMT-10M?

No. Include the contact type, wiring, cable length and slot access in the comparison. Before buying, make a simple list of the original and proposed code; complete unclear items according to the relevant sheets.

An overview of other brands can be found among magnetic sensors. Choose connecting parts in the category Sensor Cables and Connectors according to the exact connector.

Sütik ezen a weboldalon

A technikai sütikre a kosár és a rendelés működéséhez van szükség — ezeket mindig használjuk. Az analitikai sütik megmutatják, mely oldalakat keresik az emberek és hol akadnak el, és segítenek javítani a webáruházat. Ezeket csak akkor használjuk, ha engedélyezi. Bővebben: adatkezelési tájékoztatóban.